Benthowave Instrument Inc.

BENTHOWAVE INSTRUMENT INC. Acoustic Transducer & System 

Pulsed/Burst SINE for Underwater Acoustic Systems

The BII-4010 is a pulsed or burst SINE generator, which works with a power amplifier to drive the transducer in high power application. Besides, BII-4010 can also be used to drive transducers directly for low power application in Laboratory or pilot study in field.

Pulsed/Burst SINE

Suggested Application  
Active SONAR System
Seafloor Mapping, Echo Sounding
Underwater Communication
Positioning/Beacon/Transponder/Pinger/Locator
Artificial Acoustic Target, Phantom Echo Generation
SINE Reference Signal for Demodulator/Quadrature Sampling
Sub-Bottom Investigation/Assessment/Profiler
Sediment Profiling, Sediment Penetrating
Detection Buried Objects Search, Pipeline/Cable Survey
Navigation/Fishery Acoustics/Physical Oceanography
Marine Animal Acoustics, Acoustic Behavior Research
Ultrasonic Instrumentation, HIFU System
Features  
High Output Current: 250mA
Frequency Range: 0.5kHz to 3MHz
Pulse Width/Period Selectable
Pulse Width: 10μs to 100ms
Pulse Period: 1.024ms to 8hrs
High Accuracy and Stability
Pulsed/Burst SINE: Higher Order Harmonics ≤ -40dB
Factory-set Parameters
Bolts for Easy Mounting, PCB and Potted Unit
Customized Signals
 
Specification
Note: pps is pulse per second.  Pulse Period = 1/Pulse Repetition
Model Signal Type  Signal Frequency Pulse Width (PW) Pulse Repetition (PR)  
BII-4010 Pulsed Sine 0.5kHz to 3MHz 10μs to 100ms ≥ 0.000035pps Pulse Sine
Frequency Accuracy: ±0.25% typical; ±0.5% Maximum, @25°C
Frequency Stability: ±0.005%/°C, ref@25°C
Aging/Long-Term Stability: ±150 ppm/√kHr, @25°C
Analog Output Level: 1. Default: 5 Vpp
2. Custom: 1Vpp to 20Vpp
Maximum Output Current: 250 mA
Cable Drive Capability: 100m
Wiring for Signal 0.15m Wires soldered on PCB
Wiring for Power Supply:  0.15m Wires soldered on PCB
Connector:  Wire leads
Quiescent Supply Current: 4mA
Supply Voltage: +6 to +30 VDC
Suggested DC Supply: +9VDC Batteries, Marine Battery, Automobile Battery, Fixed DC Linear Power Supply, Not Included.
DO NOT use variable power supply whose maximum supply voltage is higher than the above rated voltage.
DO NOT use switching mode DC power supply.
Mounting: Two Φ2.54mm thru-hole on PCB for mounting.
Coated PCB Size (mm): ΦDxH = 50.8x9.0mm
Operating Temperature: -40°C to +85°C
Storage Temperature: -50°C to +105°C
 
How to order BII-4010:
Please specify signal frequency (kHz), pulse width (PW, ms: millisecond) and pulse repetition (PR, pps: pulses per second) when ordering. These parameters are factory-set and calibrated at 25°C, not adjustable/trimmable, but PW and PR are selectable with onboard switch's by operators.
BII-4010 -xxx -xxx -xxx -xxx -xxx -xxx
Pulsed SINE Generator Signal Frequency
in kHz
PW1
in mS
PW2
in mS
PR1
in PPS
PR2
in PPS
Analog Output Voltage Level
in Vpp
Example: Description:
BII-4010-37.5-0.2-0.5-10-0.1: BII-4010, Pulsed SINE, f=37.5kHz; Pulse Width PW1= 0.2ms, PW2=0.5ms; PR1=10pps, PR2=0.1pps; Output Voltage 5Vpp.
BII-4010-200-0.05-0.2-1-0.2-20: BII-4010, Pulsed SINE, f=200kHz; Pulse Width PW1= 0.05ms, PW2=0.2ms; Pulse Repetition PR1=1pps, PR2=0.2pps; Output Voltage 20Vpp.

BII-4010 Wiring

Cable/Wire Electrical Signal
Red +VDC
Black Common
White Signal Output

Sonar SignalSonar Signal

Go back to Products.